Rackform R447.v6
Mission-critical standards, flexible form factor

  • 4U rackmount server
  • 4 Intel® Xeon® Processors E7-4800v4 Series
  • 32 DDR3 DIMM sockets
  • Optional 10GbE adapter
  • Optional onboard SAS controller
  • 4 PCIe 3.0 expansion slots
  • 5 hot-swap SAS / SATA drive bays
  • 80 PLUS Platinum Certified redundant power supply
Based on Supermicro MP servers 8048B-TR3F, 8048B-C0R3FT.

Check out our Platform Guide to the Intel® Xeon® Processor E7 family.
   

Rackform R447.v6


Key Features

Mission-critical standards, flexible form factor

  • 4U rackmount server
  • 4 Intel® Xeon® Processors E7-4800v4 Series
  • 32 DDR3 DIMM sockets
  • Optional 10GbE adapter
  • Optional onboard SAS controller
  • 4 PCIe 3.0 expansion slots
  • 5 hot-swap SAS / SATA drive bays
  • 80 PLUS Platinum Certified redundant power supply
Based on Supermicro MP servers 8048B-TR3F, 8048B-C0R3FT.

Check out our Platform Guide to the Intel® Xeon® Processor E7 family.

Rackmount View

Total: 4U
DISCONTINUED
  • TECHNICAL SPECS

System

Server Based on Supermicro MP servers 8048B-TR3F, 8048B-C0R3FT
CPU
  • Quad Socket R1 (LGA 2011)
  • Supports 4 Intel® Xeon® E7-8800 v4 / 4800 v4 series processors (formerly known as Broadwell)
  • Up to 165W TDP
Chipset
  • Intel C602J Chipset (Patsburg)

Memory

Memory Capacity
  • 32 240-pin DDR3 DIMM sockets
  • Supports up to 2 TB DDR3 ECC DIMM and LRDIMM
Memory Type
  • 1600 / 1333 / 1066 MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 64, 32, 16, 8 GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset
  • Intel® C602J Chipset (Patsburg)
SAS
  • SAS2 (6Gb/s) backplane
  • Onboard SAS3 LSI 3008 HBA (optional)
  • SW RAID 0, 1, 5 support
SATA
  • SATA2 3Gb/s with RAID 0, 1, 5, 10
  • SATA3 6Gb/s with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controller
  • Intel® i350 Dual-Port Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • OR Intel® X540 Dual-Port 10 Gigabit Ethernet
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1 x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC

Input / Output

SAS
  • Eight 12Gb/s SAS3 ports (optional)
  • SAS2 (6Gb/s) backplane
SATA
  • 2 SATA3 ports (6Gb/s)
  • 4 SATA2 ports (3Gb/s)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • OR 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 6 USB 2.0 ports (3 rear, 2 via headers, 1 Type A)
Serial Port / Header
  • 2 COM ports (1 rear, 1 header)
Video
  • 1 VGA port
TPM
  • 1 TPM 1.2 20-pin Header
  

Drives

Hot-Swap
  • 5 x 3.5-inch SAS / SATA hot-swap drive bays
  • Enterprise HDD only recommended

Backplane

Mobile Rack Backplane
  • SAS / SATA backplane with SES-II (SAS support requires SAS controller)
  • Utilizes I2C or SGPIO

Expansion Slots

PCI Express
  • 2 full-height PCIe 3.0 x16 slots (slot 1, 3)
  • 2 full-height PCIe 3.0 x8 slots (slot 2, 4)
  • Note: for access to all PCI slots, at least 2 CPUs must be populated

Cooling

Fans
  • Three 7500 RPM hot-swap cooling fans
  • Three 8200 RPM hot-swap rear exhaust fans

Front Panel

Buttons and Switches
  • Power On / Off button
  • System Reset button
LEDs
  • Power
  • Hard Drive
  • NIC 1 Activity
  • NIC 2 Activity
  • System Information
  • Power fail
Ports
  • 2 x Front USB 2.0 Ports

Chassis

Form Factor
  • 4U rackmount or tower chassis
Height (rackmounted)
  • 178 mm, 7 inches
Width (rackmounted)
  • 462 mm, 18.2 inches
Depth
  • 721 mm, 28.4 inches
Chassis Weight
  • 30 kg, 66 lbs

Power

Power Supply
  • Redundant 1400W power supply with Digital Switching Control & PMBus 1.2
  • 80 PLUS Platinum Certified
AC Input
  • 100–240 V, 50–60 Hz, 15 Amp max
+12V
  • 100 Amp / 115 Vac
  • 117 Amp / 230 Vac
with Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp

Environment

Ambient Temperature
  • Operating: 10° to 35° C (50° to 95° F); non-operating: -40° to 70°C (-40° to 158° F)
Relative Humidity
  • Operating: 8–90% non-condensing; Non-operating: 5–95% non-condensing

Regulatory Compliance

RoHS
  • RoHS compliant
Power Supply Safety / EMC
  • USA – UL listed
  • Canada – CUL listed
  • Germany – TUV Certified
  • EN 60950 / IEC 60950 Compliant
  • CB Report
  • CCC Certification