Reveal Menu
Home > Discontinued > Rackmount Servers > AMD

Rackform nServ A4410.v3
4 complete nodes in 2U – an outstanding blade alternative
  • 2U 4-node rackmount server
  • Independently serviceable, cable-free nodes
  • 4 x 2 AMD Opteron™ 6200 Series Processors
  • 4 x 16 DDR3 DIMM sockets
  • 4 x 1 integrated dual-port Gigabit Ethernet adapter
  • 4 x 1 integrated IPMI with KVM over LAN
  • 4 x 1 low-profile PCIe 2.0 expansion slot
  • 4 x 3 hot-swap SATA drive bays
  • 80 PLUS Gold Certified redundant power supply



Please see our Rackform nServ A4410.v4 2U 4-node server.
   
Technical Specs
Per-Node Features Shared Resources  
 

System

CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 8-core, 12-core, or 16-core AMD Opteron™ 6100 or 6200 Series processors
  • HT3.0 Link support
  • Supports processors with Max ACP 80W (TPD 115W)
Chipset
  • AMD chipset SR5690 / SP5100

Memory

Memory Capacity
  • 16 DIMM sockets
  • Supports up to 256 GB Registered DDR3 1600 / 1333 / 1066 MHz memory
  • Supports up to 64 GB Unbuffered DDR3 1600 / 1333 / 1066 MHz memory
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR3 1600 / 1333 / 1066 MHz Registered ECC SDRAM or Unbuffered ECC / non-ECC 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V

Integrated Devices

Chipset
  • AMD chipset SR5670 + SP5100
SATA
  • AMD SP5100
  • RAID 0, 1, 10 support (Windows only)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Gigabit Ethernet Controller
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
  

Input / Output

SATA
  • 6 SATA 2.0 (3 Gb/s) ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 2 header (4 ports)
  • 1 Type A port
  • Total 5 USB 2.0 Compliant
VGA
  • 1 VGA Port
Serial Port / Header
  • 1 x Fast UART 16550 serial port
  • 1 serial port header

Management

Software
  • IPMI (Intelligent Platform Management Interface) v2.0
Power Configurations
  • ACPI 2.0 Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery

Storage

Integrated SATA
  • 3 x SATA ports via daughter board
Drive bays
  • 3 x 3.5" SATA hot-swap drive bays
  • Enterprise SATA HDD only recommended

Expansion Slot

PCIe
  • 1 x PCIe 2.0 x16 (up to 5.9 inches deep)
 

Chassis

Form Factor
  • 2U rackmount chassis
Height
  • 88 mm, 3.47"
Width
  • 438 mm, 17.25"
Depth
  • 724 mm, 28.5"
Chassis Weight
  • 43 lbs
  • 85 lbs pkg weight

Environment

Ambient Temperature
  • Operating: 10°C to 35°C; non-operating: -40°C to 70°C
Relative Humidity
  • Operating: 8 – 90% non-condensing; Non-operating: 5 – 95% non-condensing
  

Power

Power Supply
  • 1400W high-efficiency power supply with PMBus
  • 80 PLUS Gold Certified
AC Input
  • 1100W: 100 – 140V, 50 – 60Hz, 9.5 – 13.5 Amp
  • 1400W: 180 – 240V, 50 – 60Hz, 7.0 – 9.5 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 92 Amp @ 100-140V
  • 116 Amp @ 180-240V
With distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp

Regulatory (Power Supply)

Power Supply Safety / EMC
  • USA – UL listed, FCC
  • Canada – CUL listed
  • CCC Certification
  • EN 60950 / IEC 60950-Compliant
  • Europe / CE Mark
  • Germany – TUV Certified
Silicon Mechanics