Hello guest   •   log in   •   shopping cart
Site Search:
Quote Lookup:
Quote ID
Conf #
Home > Rackform Rackmount Servers > Rackform iServ

Rackform iServ R4410.v2.1
4 complete nodes in 2U, now with 4 x 3 hot-swap SAS / SATA drives
  • 2U 4-node rackmount server
  • Independently serviceable, cable-free nodes
  • 4 x 2 Intel® Xeon® Processors 5600 Series
  • 4 x 12 DDR3 DIMM sockets
  • 4 x 1 integrated dual-port Gigabit Ethernet adapter
  • 4 x 1 integrated IPMI with KVM over LAN
  • 4 x 1 low-profile PCIe expansion slot
  • 4 x 3 hot-swap SAS / SATA drive bays
  • 80 PLUS Gold Certified redundant power supply
Read an overview of the features in the Intel Xeon Processor 5600 Series, see product specifications, and learn about matching processors to memory. (PDF Format)
  Please see the Rackform iServ R4410.v3 with Intel Xeon Processor E5-2600 Series
   
System Price:  $8825.00  
Warranty   $0.00  
Configure Technical Specs
Per-Node Features Shared Resources  
 

System

CPU
  • Dual 1366-pin LGA sockets
  • Supports 2 Intel® Xeon® 5600 Series processors 40W – 95W (QPI up to 6.4 GT/s)
Chipset
  • Intel® 5520 (Tylersburg)
  • ICH10R

Memory

Memory Capacity
  • Twelve 240-pin DDR3 DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz Registered ECC / Unbuffered ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset
  • Intel® 5520 (Tylersburg)
  • ICH10R
SAS (optional)
  • LSI 6Gb/s SAS 2108 with hardware RAID support
  • RAID 0, 1, 5 support
SATA
  • Intel® ICH10R SATA 3Gb/s controller
  • RAID 0, 1, 5, 10 support (Windows only)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2 Intel® 82574L Gigabit Ethernet controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support
  • VMDq support
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond® W83527HG chip
  

Input / Output

Serial ATA
  • 3 SATA hard drives supported via 3 Gb/s SATA controller
  • Note: 6Gb/s SATA hard drives will operate at 3Gb/s SATA interface speeds
SAS (optional)
  • 3 SAS drives supported via LSI 6Gb/s SAS 2108 controller
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 ports)
  • Total 4 USB 2.0 Compliant
VGA
  • 1 VGA Port
Serial Port / Header
  • 1 x Fast UART 16550 serial port

Management

Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery

Storage

Drive bays
  • 3 x 3.5" SAS / SATA hot-swap drive bays
  • SAS or Enterprise SATA HDD only recommended

Expansion Slot

PCIe
  • With SATA controller only: 1 x low-profile PCIe 2.0 x16 (via riser)
  • With SAS controller: 1 x low-profile PCIe 2.0 x8 (via riser)
 

Cooling

Fans
  • Four 80mm x 38mm 9.5K RPM 4-pin PWM Cooling Fans with optimal fan speed control

Chassis

Form Factor
  • 2U rackmount chassis
Height
  • 88 mm, 3.47"
Width
  • 438 mm, 17.25"
Depth
  • 724 mm, 28.5"
Chassis Weight
  • 43 lbs
  • 68 lbs pkg weight

Environment

Ambient Temperature
  • Operating: 10°C to 35°C; non-operating: -40°C to 70°C
Relative Humidity
  • Operating: 8 – 90% non-condensing; Non-operating: 5 – 95% non-condensing
  

Power

Power Supply
  • Redundant 1100W / 1400W power supply with PMBus
  • 80 PLUS Gold Certified
AC Input
  • 1100W: 100 – 140V, 50 – 60Hz, 9.5 – 13.5 Amp
  • 1400W: 180 – 240V, 50 – 60Hz, 7.0 – 9.5 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 92 Amp @ 100-140V
  • 116 Amp @ 180-240V
With distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp

Regulatory (Power Supply)

Power Supply Safety / EMC
  • USA – UL listed, FCC
  • Canada – CUL listed
  • CCC Certification
  • EN 60950 / IEC 60950-Compliant
  • Europe / CE Mark
  • Germany – TUV Certified
Rackform Rackmount Servers
High-Density Servers
Storform Storage
Hyperform HPC
Racks & Accessories
Spares Kits
What's New
1U Servers
2U Servers
3U & Larger Servers
Virtualization Products
Battery Backup Modules
Warranties
Technical Support
Documentation
Discontinued Servers
Library
News & Press Releases
Events
Careers
Newsletters
Privacy Policy
About Us
Contact Us
My Account
Cart
Checkout

Copyright © 2012 Silicon Mechanics

Silicon Mechanics and the Silicon Mechanics logo are registered trademarks of Silicon Mechanics, Inc.
Intel, the Intel logo, Xeon, and Xeon Inside, are trademarks or registered trademarks of Intel Corporation in the US and other countries.
All other trademarks are the property of their respective owners.