| Microprocessor |
| Supports up to 2 microprocessors |
Intel® Xeon® with 800 MHz system bus at 3.20 GHz, 1MB L2 cache or faster |
| Chipset |
Intel® E7520 |
| Memory |
| Four double data rate (DDR2) |
| Memory Capacity |
Support for 512 MB to 8 GB |
| DIMM Sizes |
256 MB, 512 MB, 1 GB, 2 GB |
| Memory Type |
2-way interleaved DDR2-400, PC3200, ECC SDRAM registered DIMMs only |
| Drives |
| Support for up to two internal 2.5-inch hard disk drives |
| Support for up to two 3.5" Ultra320 SCSI hot-swap hard disk drives (80-pin, SCA-2 connectors). Maximum data transfer: 320MB/sec on each Ultra 320 LVD channel. Supports RAID-1 or RAID-1E |
| Size |
| Height |
24.5 cm (9.7 inches) |
| Depth |
44.6 cm (17.6 inches) |
| Width |
2.9 cm (1.14 inches) |
| Maximum weight |
6.8 kg (15 lbs.) |
| Integrated Functions |
| Two Gigabit Ethernet controllers support full duplex, Wake on LAN®, teaming and failover |
| ATI Rage 7000M video controller |
| Local service processor provides interface for communication with the Intel® Server Blade Chassis and the management module, system and environmental monitoring, event recording and alert capability |
| Light-Guided Diagnostics (LED lights indicate failing component) Flash-based embedded diagnostics |
| USB buses for communication with keyboard, mouse, diskette drive, and CD-ROM drive1 |
| Front Panel Buttons |
Keyboard/
mouse/
video |
This button is for associating the keyboard port, mouse port, and video port with this blade server; the LED on this button flashes while the request is being processed, then is steady when ownership has been transferred to the blade server |
| Power Control Button |
This button is located behind the control panel door; press this button to manually turn the blade server on or off |
| Front Panel LEDs |
| Blade-error LED |
When this amber LED is lit, it indicates that a system error has occurred in the blade server |
| Information LED |
When this amber LED is lit, it indicates that information about a system error for the blade server has been placed in the system Error log |
| Location LED |
When this blue LED is lit, it has been turned on remotely by the system administrator to aid in visually locating the blade server; the location LED on the SBCE unit will be on as well |
| Activity LED |
When this green LED is lit, it indicates that there is hard-disk-drive or network activity |
| Power-on LED |
This green LED indicates the power status of the blade server in the following manner:
• Flashing rapidlyâthe service processor on the blade server is handshaking with the SBCE management module
• Flashing slowlyâthe blade server has AC power but is not turned on
• Steadyâthe blade server has AC power and is turned on |
|
 |
| Input/Output |
| Power, cooling, removable-media drives, external ports, and advanced system management are provided by the Intel® Server Chassis SBCE. |
| Environment |
| Air Temperature |
Operating (system): 10°C to 35°C (50°F to 95°F); 0 to 914m (2998.69 ft) altitude
Operating (system): 10°C to 32°C (50°F to 89.6°F); 914m to 2134m (2998.69 to 7000 ft.ft) altitude
Non-operating (system): â40° to +60°C (-40° to +140°F) |
| Humidity |
Operating: 8% to 80%
Non-operating: 5% to 80% |
| Electrical Input |
| Input Voltage |
12 V dc |
| Safety Compliance |
| USA |
UL 60950 â 3rd Edition/CSA 22.2. No. 60950 |
| Canada |
cUL certified â 3rd Edition/CSA 22.2. No. 60950- for Canada (product bea the single cUL mark for U.S. and Canada) |
| Europe |
Low Voltage Directive, 73/23/EEC TUV/GS to EN60950 2nd Edition with Amendments, A1 = A2 + A3 + A4 |
| International |
TUV/CB to IEC 60950 3rd Edition
TUV/CB - EN60 950 2nd Edition + Amd 1-4
TUV/CB - EMKO-TSE (74-SEC) 207/94 |
| Australian/New Zealand |
CB Report to IEC 60950, 3rd Edition plus international deviation |
|
| Electromagnetic Compatibility (EMC) |
| USA |
FCC CFR 47 Part 2 and 15, Verified Class A Limit |
| Canada |
IC ICES-003 Class A Limit |
| Europe |
EMC Directive, 89/336/EEC
EN55022, Class A Limit, Radiated & Conducted Emissions
EN55024 ITE Specific Immunity Standard
EN61000-4-2 ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge)
EN61000-4-3 Radiated Immunity (Level 2)
EN61000-4-4 Electrical Fast Transient (Level 2)
EN61000-4-5 AC Surge
EN61000-4-6 Conducted RF
EN61000-4-8 Power Frequency Magnetic Fields
EN61000-4-11 Voltage Dips and Interrupts
EN61000-3-2 Limit for Harmonic Current Emissions
EN61000-3-3 Voltage Flicker |
| Japan |
VCCI Class A ITE (CISPR 22, Class A Limit)
IEC 1000-3-2 Limit for Harmonic Current Emissions |
| Australian/New Zealand |
AS/NZS 3548, Class A Limit |
| Taiwan |
BSMI Approval |
| Korea |
RRL Approval |
|
