Hello guest   •   log in   •   shopping cart
Site Search:
Quote Lookup:
Quote ID
Conf #
Home > Rackform Rackmount Servers > 3U & Larger Servers

Storform iServ R518.v2.1
Front and rear drive deployment
  • 4U rackmount storage server
  • 2 Intel® Xeon® Processors 5600 Series
  • 12 DDR3 DIMM sockets
  • 2 Integrated Gigabit Ethernet adapters
  • Integrated IPMI with KVM over LAN
  • 5 PCIe expansion slots
  • 36 hot-swap SAS / SATA drive bays: 24 front, 12 rear
  • Redundant 80 PLUS Gold Certified power supply
The R518.v2.1 Storform Storage platform is readily expandable using our Storform JBOD products.


   
System Price:  $4545.00  
Warranty   $0.00  
Configure Technical Specs Technical Support

System

CPU
  • Dual 1366-pin LGA sockets
  • Supports 2 Intel® Xeon® 5600 Series processors (QPI up to 6.4 GT/s)
  • Note: 130W processors may not be viable for all configurations. Please consult with your Sales Expert.
Chipset
  • Intel® 5520 (Tylersburg)
  • ICH10R + IOH-36D

Memory

Memory Capacity
  • Twelve 240-pin DDR3 DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Integrated Devices

Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SAS (optional)
  • LSI 6Gbps SAS2008 HBA (integrated)
  • RAID 0, 1, 10 support (Windows only)
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows only)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • Optional dedicated NIC
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Dual Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support
  • VMDq support
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond® 83827HF chip

Input / Output

SAS (Optional)
  • 8 SAS / SATA ports via 2 x SFF-8087 Connectors
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB rear ports
  • 2 USB on-board
  • 4 USB internal headers
  • Total 8 USB 2.0 Compliant
VGA
  • 1 VGA Port
Serial Port / Header
  • 1 x Fast UART 16550 serial port
  • 1 x Fast UART 16550 serial header (option)
KB / Mouse
  • PS/2 keyboard and mouse ports

Management

Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Super Doctor III
Power Configurations
  • ACPI / ACPM Power Management
  

Expansion Slots

PCIe
  • 3 x low-profile PCIe 2.0 x8
  • 1 x low-profile PCIe 2.0 x8 (with optional SATA-only board)
  • 1 x low-profile PCIe 2.0 x4
  • 1 x low-profile PCIe x4

Storage

Hot Swap Drive bays
  • 36 (24 front + 12 rear) x 3.5" Hot-swap (SAS / SATA) Drive Bays
Optional Fixed Drive bays
  • 2 x Fixed Internal Hard Drive Bays OR
  • 1 x Fixed Internal Hard Drive Bay and
  • 1 x DVD-ROM Drive

SAS Backplane

4U Expander Backplane
  • Scalability through cascading
  • 6Gb/s support
  • Inband SES-2 Enclosure Management
  • SAS/SATA support
  • Single input / output SFF-8087 connectors
2U Expander Backplane
  • Scalability through cascading
  • 6Gb/s support
  • Inband SES-2 Enclosure Management
  • SAS/SATA support
  • Single input / output SFF-8087 connectors

System Cooling

Fans
  • 7 x 8cm Swappable Cooling Fans
  • Redundant cooling

Front Panel

Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2 x Network activity LEDs
  • System Overheat LED
  • Power Fail LED

Chassis

Form Factor
  • 4U rackmount chassis
Height
  • 7" (178 mm)
Width
  • 17.2" (437 mm)
Depth
  • 27.5" (699 mm)
Weight (chassis only)
  • 80 lbs (36.3 kg)
Rail Kit
  • Compatible with four-post racks, tool-less rail kit, 26.8 – 34 inches
  • Optional tool-less rail kit, 19 – 26.6 inches

Operating Environment

Operating Temperature Range
  • 10 – 35°C (50 – 95°F)
Non-Operating Temperature Range
  • -40 – 70°C (-40 – 158°F)
Humidity Range
  • 8 – 90% non-condensing
Non-Operating Humidity Range
  • 5 – 95% non-condensing

Power

Power Supply
  • Redundant 1400W high-efficiency power supply with PMBus
  • 80 PLUS Gold Certified
AC Input
  • 1100W: 100 – 140V, 50 – 60Hz, 9.5 – 13.5 Amp
  • 1400W: 180 – 240V, 50 – 60Hz, 7.0 – 9.5 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 92 Amp @ 100-140V
  • 116 Amp @ 180-240V
With distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp

Regulatory (Power Supply)

Power Supply Safety / EMC
  • USA – UL listed, FCC
  • Canada – CUL listed
  • CCC Certification
  • EN 60950 / IEC 60950-Compliant
  • Europe / CE Mark
  • Germany – TUV Certified
Rackform Rackmount Servers
High-Density Servers
Storform Storage
Hyperform HPC
Racks & Accessories
Spares Kits
What's New
1U Servers
2U Servers
3U & Larger Servers
Virtualization Products
Battery Backup Modules
Warranties
Technical Support
Documentation
Discontinued Servers
Library
News & Press Releases
Events
Careers
Newsletters
Privacy Policy
About Us
Contact Us
My Account
Cart
Checkout

Copyright © 2012 Silicon Mechanics

Silicon Mechanics and the Silicon Mechanics logo are registered trademarks of Silicon Mechanics, Inc.
Intel, the Intel logo, Xeon, and Xeon Inside, are trademarks or registered trademarks of Intel Corporation in the US and other countries.
All other trademarks are the property of their respective owners.