System
| CPU |
- Dual 1366-pin LGA sockets
- Supports 2 Intel® Xeon® 5600 Series processors (QPI up to 6.4 GT/s)
|
| Chipset |
- Intel® 5520 (Tylersburg)
- ICH10R + IOH-36D
|
Memory
| Memory Capacity |
- Twelve 240-pin DDR3 DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
Integrated Devices
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SAS (optional) |
- LSI 6Gbps SAS2008 HBA (integrated)
- RAID 0, 1, 10 support (Windows only)
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- Optional dedicated NIC
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support
- VMDq support
- 1 Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
Input / Output
| SAS (Optional) |
- 8 SAS / SATA ports via 2 x SFF-8087 Connectors
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 4 USB rear ports
- 2 USB on-board
- 4 USB internal headers
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Serial Port / Header |
- 1 x Fast UART 16550 serial port
- 1 x Fast UART 16550 serial header (option)
|
| KB / Mouse |
- PS/2 keyboard and mouse ports
|
Management
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- Super Doctor III
|
| Power Configurations |
- ACPI / ACPM Power Management
|
|
|
Expansion Slots
| PCIe |
- 3 x low-profile PCIe 2.0 x8
- 1 x low-profile PCIe 2.0 x8 (with optional SATA-only board)
- 1 x low-profile PCIe 2.0 x4
- 1 x low-profile PCIe x4
|
Storage
| Hot Swap Drive bays |
- 24 x 2.5" Hot-swap SAS Drive Bays
|
SAS Backplane
| 2U Expander Backplane |
- Scalability through cascading
- 6Gb/s support
- Inband SES-2 Enclosure Management
- SAS/SATA support
- Single input / output SFF-8087 connectors
|
System Cooling
| Fans |
- 3 x 6300 RPM Swappable Cooling Fans
|
Front Panel
| Buttons |
- Power On / Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2 x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
Chassis
| Form Factor |
|
| Height |
|
| Width |
|
| Depth |
|
| Net Weight |
|
| Gross Weight |
|
Operating Environment
| Operating Temperature Range |
- 10°C – 35°C (50°F – 95°F)
|
| Non-Operating Temperature Range |
- -40°C – +70°C (-40°F to 158°F)
|
| Humidity Range |
|
| Non-Operating Humidity Range |
|
Power Supply & Power Distributor
| Power Modules |
- 900W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC
|
| AC Voltage |
- 100 – 240V, 50-60Hz, 10–4 Amp
|
| +5V Standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
Safety / Regulatory Compliance (Power Supply)
| United States |
|
| Canada |
|
| Europe, CE Mark |
- EN60950 / IEC 60950-Compliant (complies with 73 / 23 / EEC)
|
| Germany |
|
| International |
- EN 60950 / IEC 60950 Compliant
- CB Report
- CCC Certification
|
|
