System
| CPU |
- Dual 1366-pin LGA sockets
- Supports 2 Intel® Xeon® 5600 Series processors (QPI up to 6.4 GT/s)
|
| Chipset |
- Intel® 5520 (Tylersburg)
- ICH10R + IOH-36D
|
Memory
| Memory Capacity |
- Twelve 240-pin DDR3 DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
- Memory mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
Integrated Devices
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SAS (optional) |
- LSI SAS1068E
- RAID 0, 1, 10 support
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support
- VMDq support
- 1 Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
Input / Output
| SAS (Optional) |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 4 USB rear ports
- 2 USB on-board
- 4 USB internal headers
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Serial Port / Header |
- 1 x Fast UART 16550 serial port
- 1 x Fast UART 16550 serial header (option)
|
| KB / Mouse |
- PS/2 keyboard and mouse ports
|
|
|
Management
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- Super Doctor III
|
| Power Configurations |
- ACPI / ACPM Power Management
|
Storage
| Drive bays |
- 16 x 3.5" SAS / SATA hot-swap drive bays
|
Peripheral Drives
| Optical Media |
|
| Front Input |
- 1.44MB floppy drive (optional)
|
Expansion Slots
| PCIe |
- 3 x PCIe 2.0 x8
- 1 x PCIe x4
|
| PCI |
|
Front Panel
| Buttons and Switches |
|
| LEDs |
- Power
- Hard Drive
- NIC 1 Activity
- NIC 2 Activity
- Overheat
- Power Fail
|
| Ports |
- 2 x USB Ports & DB9 COM Port
|
Chassis
| Form Factor |
|
| Height |
|
| Width |
|
| Depth |
|
| Rail Kit |
- Compatible with four-post racks
- Min post depth: 679 mm, 26.75"
- Max post depth: 883 mm, 34.5"
- Min enclosure depth: 699 mm, 27.5"
|
Power
| Power Supply |
- 800W (1 + 1) Redundant AC-DC high-efficiency power supply with PFC
|
| AC Voltage |
- 100 – 240V, 50-60Hz, 10–4 Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
Environment
| Ambient Temperature |
- Operating: 10°C to 35°C; non-operating: -40°C to 70°C
|
| Relative Humidity |
- Operating: 8–90% non-condensing; Non-operating: 5–95% non-condensing
|
Safety / Regulatory Compliance (Power Supply)
| United States |
|
| Canada |
|
| Europe, CE Mark |
- EN60950 / IEC 60950-Compliant
|
| Germany |
|
|
