Hello guest   •   log in   •   shopping cart
Site Search:
Quote Lookup:
Quote ID
Conf #
Home > Hyperform HPC > NVIDIA Tesla

Hyperform HPCg R3401 Cluster with NVIDIA Tesla
HPCg R3401 Tesla™ preconfigured Cluster with Intel® Xeon® 5500 Series processors will deliver supercomputing performance at lower power and lower cost, using fewer systems than standard CPU-only clusters. The HPCg R3401 is powered by the NVIDIA® S1070 Computing System, a four-teraflop 1U system based on NVIDIA® CUDA™ parallel computing architecture. The S1070 1U speeds the transition to energy-efficient parallel computing and scales to solve the world's most important computing challenges more quickly and accurately.

The default configuration includes Head Node with 4 Compute nodes integrated with 2 x Tesla™ S1070. This also includes ROCKS+ licenses which adds vastly expanded solution layer and enterprise-class support.

The turnkey 24U system configured below is also available in 12u rack and a 42u rack.


   
System Price:  $38242.00  
Configure Technical Specs
Head Node: Rackform iServ R346 Compute Node: Rackform iServ R4410-IB NVIDIA Tesla S1070 – 400 (1.296 GHz peak clock) GPU Computing System
 

System

CPU
  • Dual 1366-pin LGA sockets
  • Supports 2 Intel® Xeon® 5500 Series processors (QPI up to 6.4 GT/s)
Chipset
  • Intel® 5520 (Tylersburg)
  • ICH10R + IOH-36D

Memory

Memory Capacity
  • Twelve 240-pin DDR3 DIMM sockets
  • Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Integrated Devices

Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
SAS (optional)
  • LSI SAS1068E
  • RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support
  • VMDq support
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond® 83827HF chip

Input / Output

SAS (Optional)
  • 8 SAS / SATA ports
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB rear ports
  • 2 USB on-board
  • 4 USB internal headers
  • Total 8 USB 2.0 Compliant
VGA
  • 1 VGA Port
Serial Port / Header
  • 1 x Fast UART 16550 serial port
  • 1 x Fast UART 16550 serial header (option)
KB / Mouse
  • PS/2 keyboard and mouse ports
  

Storage

Hot-Swap Drives
  • 8 x 3.5" SAS / SATA hot-swap drive bays
Fixed Drive
  • 2 x 3.5" fixed SATA drives
  • OR 1.44MB floppy drive and 3.5" fixed SATA drive

Management

Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Super Doctor III
Power Configurations
  • ACPI / ACPM Power Management

Peripheral Drives

Optical Media
  • Slim DVD-ROM drive (optional)
Floppy Drive
  • Slim floppy drive (optional)

Expansion Slots

Low-Profile PCIe
  • 3 x PCIe 2.0 x8
  • 1 x PCIe x4
Low-Profile PCI
  • 2 x 33MHz PCI

Front Panel

Buttons
  • Power button
  • Reset button
LEDs
  • Power
  • Hard Drive
  • NIC 1 Activity
  • NIC 2 Activity
  • Overheat
  • Power Fail

Back Panel

Power Receptacle
  • IEC-320 C14 AC

Chassis

Form Factor
  • 2U rackmount chassis
Height
  • 89 mm, 3.5"
Width
  • 437 mm, 17.2"
Depth
  • 648 mm, 25.5"
Chassis Weight
  • 52 lbs (23.59 kg)

Power

Power Supply
  • Redundant 720W AC Power Supply with PMBus
AC Input
  • 100–240 V, 50–60 Hz, 4–9 Amp
DC Output
  • 3 Amp @ +5V standby
  • 59 Amp @ +12V

Environment

Ambient Temperature
  • Operating: 10°C to 35°C; non-operating: -40°C to 70°C
Relative Humidity
  • Operating: 8–90% non-condensing; Non-operating: 5–95% non-condensing

Safety / Regulatory Compliance (Power Supply)

United States
  • UL Listed, FCC
Canada
  • cUL listed
Europe
  • EN 60950/IEC 60950-Compliant
Germany
  • TUV Certified
International
  • CB Report
 

System

CPU
  • Dual 1366-pin LGA sockets
  • Supports 2 Intel® Xeon® 5500 Series processors (QPI up to 6.4 GT/s)
Chipset
  • Intel® 5520 (Tylersburg)
  • Up to 6.4 GT/s QPI

Memory

Memory Capacity
  • Twelve DDR3 DIMM sockets
  • Supports up to 48 GB DDR3 1333 / 1066 / 800MHz ECC memory
Memory Type
  • DDR3 1333 / 1066 / 800MHz ECC DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB

On-Board Devices

Chipset
  • Intel® 5520 chipset with QPI up to 6.4 GT/s
InfiniBand
  • ConnectX DDR InfiniBand with QSFP connector
  • OR ConnectX QDR InfiniBand with QSFP connector
  • OR Infinihost III InfiniBand with CX4 connector
SATA
  • Intel® ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows only)
IPMI
  • Intelligent Platform Management Interface (IPMI) 2.0 + KVM with dedicated LAN
  • Virtual Media over LAN
  • Watch Dog
Network Controllers
  • Intel® 82576 dual-port Gigabit Ethernet controller

Network

Integrated Interfaces
  • Intel® 82576 dual-port Gigabit Ethernet controller

Management

Intelligent Platform Management Interface
  • IPMI 2.0 + KVM with dedicated LAN
  • Virtual Media over LAN
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Internal / external modem ring-on
  • Wake-On-LAN (WOL)
  • Control of power-on mode for recovery from AC power loss
  • SDDC
  • TM2 & CPU thermal trip support for processor protection

Input / Output

Graphics
  • Matrox G200eW
USB
  • Up to 4 x USB 2.0
Serial
  • 1 x fast UART 16550 serial
  

Storage

Integrated SATA
  • 6 x SATA ports via Intel® ICH10R SATA 3.0Gbps controller
Drive bays
  • 3 x 3.5" SAS / SATA hot-swap drive bays

Shared Devices

Following devices are shared by 4 compute nodes

External Drive

Optional USB 2.0 DVD Drives
  • Slim External DVD Writer – 8X DVD+R, 8X DVD-R, 6X DVD+R9 , 6X DVD-R9, 5X DVD-RAM, 8X DVD+RW, 6X DVD-RW, USB + AC power
  • External DVD RW – 20x DVD+R, 8X DVD+RW, 20x DVD-R, 6x DVD-RW, 16X DVD-ROM, 48X CD-ROM, USB + AC power

Chassis

Form Factor
  • 2U rackmount chassis
Height
  • 88 mm, 3.47"
Width
  • 438 mm, 17.25"
Depth
  • 724 mm, 28.5"
Rail Kit
  • Compatible with four-post racks

Environment

Ambient Temperature
  • Operating: 10°C to 35°C; non-operating: -40°C to 70°C
Relative Humidity
  • Operating: 8 – 90% non-condensing; Non-operating: 5 – 95% non-condensing

Power

Power Supply
  • Redundant 1200W high-efficiency power supply with PMBus
  • 92% maximum efficiency at 230VAC
  • 88% maximum efficiency at 115VAC
AC Input
  • 100 – 140 V, 50 – 60 Hz, 7.5 – 11 Amp
  • 180 – 240 V, 50 – 60 Hz, 5 – 8 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 74 Amp @ 100-140V
  • 100 Amp @ 180-240V

Regulatory (Power Supply)

Power Supply Safety / EMC
  • USA – UL listed, FCC
  • Canada – CUL listed
  • CCC Certification
  • EN 60950 / IEC 60950-Compliant
  • Europe / CE Mark
  • Germany – TUV Certified
 

System Specifications

CPU
  • 4 Tesla T10 GPUs
Memory
  • 16.0 GB high speed memory, 4.0 GB per GPU
  • GPU Memory Clock – 792 Mhz
  • Memory I/O – 512 bit per GPU

Host interface cards

Standard card Per Card:
  • x16 PCIe slot required
  • Low-profile form factor
  • 0.5 meter cable included
  • Other cable lengths & card sizes available

Chassis

Form Factor
  • 1U rackmount chassis
Height
  • 43 mm, 1.7"
Width
  • 442 mm, 17.42"
Depth
  • 503 mm, 19.8"
Rail Kit
  • Compatible with four-post, 19" EIA compatible racks
  • Min post depth: 729 mm, 28.7"
  • Max post depth: 922 mm, 63.3""
  • Min enclosure depth: 743 mm, 29.25"
  

Power

Input Power
  • 90–274 VAC
  • 50–60 Hz
  • C19 connector for power cord
Power Supply
  • 1200 Watt / Auto Switching

Environment

Ambient Temperature
  • Operating: 10°C to 35°C
  • Non-Operating: -40°C to 60°C
Relative Humidity
  • Operating: 10–80% non-condensing
  • Non-Operating: 10–80% non-condensing
Altitude
  • Operating: 0–5000 feet mean sea level
  • Non-Operating: 0–10,000 feet mean sea level with maximum allowable rate of altitude change of 2000 ft/min
Maximum Airflow
  • 143 cfm

Safety / Regulatory Compliance (Power Supply)

United States
  • FCC
Canada
  • ICES-0003
Europe
  • EN61000-3-2
  • EN61000-3-3
  • EN60950
International
  • IEC 60950–1
Rackform Rackmount Servers
High-Density Servers
Storform Storage
Hyperform HPC
Racks & Accessories
Spares Kits
What's New
1U Servers
2U Servers
3U & Larger Servers
Virtualization Products
Rackmount LCDs
Battery Backup Modules
Warranties
Technical Support
Documentation
Discontinued Servers
Library
News & Press Releases
Events
Careers
Newsletters
Privacy Policy
About Us
Contact Us
My Account
Cart
Checkout

Copyright © 2012 Silicon Mechanics

Silicon Mechanics and the Silicon Mechanics logo are registered trademarks of Silicon Mechanics, Inc.
Intel, the Intel logo, Xeon, and Xeon Inside, are trademarks or registered trademarks of Intel Corporation in the US and other countries.
All other trademarks are the property of their respective owners.