Hello guest   •   log in   •   shopping cart
Site Search:
Quote Lookup:
Quote ID
Conf #
Home > Discontinued > Rackmount Servers > Intel

Rackform iServ R4410-IB
The Rackform iServ R4410-IB 2U 4-Node Server supports 4 swappable, full-featured nodes in a 2U chassis with redundant power supply. Each node features 2 Intel Xeon 5500 Series processors, 12 DDR3 DIMM slots, 3 hot-swap SATA drives, dual-port integrated Gigabit Ethernet adapter, integrated IPMI and KVM with dedicated LAN, integrated InfiniBand, and a low-profile PCIe expansion slot. With unmatched density and redundant power, the R4410-IB 2U 4-Node Server offers a superior choice for high-performance computing.

Please see our Rackform iServ R4410-IB.v2 2U 4-Node InfiniBand Server.
Technical Specs Technical Support
Per-Node Features Shared Resources  
 

System

CPU
  • Dual 1366-pin LGA sockets
  • Supports 2 Intel® Xeon® 5500 Series processors (QPI up to 6.4 GT/s)
Chipset
  • Intel® 5520 (Tylersburg)
  • ICH10R + IOH-36D

Memory

Memory Capacity
  • Twelve 240-pin DDR3 DIMM sockets
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
InfiniBand
  • Infinihost III InfiniBand with CX4 connector
  • OR ConnectX DDR InfiniBand with QSFP connector
  • OR ConnectX QDR InfiniBand with QSFP connector
SATA
  • Intel® ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows only)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support
  • VMDq support
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond® W83527HG chip
  

Input / Output

Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 ports)
  • Total 4 USB 2.0 Compliant
VGA
  • 1 VGA Port
Serial Port / Header
  • 1 x Fast UART 16550 serial port
InfiniBand
  • 1 External CX4 InfiniBand Connector (Infinihost)
  • OR 1 External QSFP Infiniband Connector (ConnectX DDR & QDR)

Management

Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery

Storage

Integrated SATA
  • 6 x SATA ports via Intel® ICH10R SATA 3.0Gbps controller
Drive bays
  • 3 x 3.5" SAS / SATA hot-swap drive bays

Expansion Slot

PCIe
  • 1 x PCIe 2.0 x16
 

External Drive

Optional USB 2.0 DVD Drives
  • Slim External DVD Writer – 8X DVD+R, 8X DVD-R, 6X DVD+R9 , 6X DVD-R9, 5X DVD-RAM, 8X DVD+RW, 6X DVD-RW, USB + AC power
  • External DVD RW – 20x DVD+R, 8X DVD+RW, 20x DVD-R, 6x DVD-RW, 16X DVD-ROM, 48X CD-ROM, USB + AC power

Chassis

Form Factor
  • 2U rackmount chassis
Height
  • 88 mm, 3.47"
Width
  • 438 mm, 17.25"
Depth
  • 724 mm, 28.5"
Weight
  • 43 lbs
  • 68 lbs pkg weight

Environment

Ambient Temperature
  • Operating: 10°C to 35°C; non-operating: -40°C to 70°C
Relative Humidity
  • Operating: 8 – 90% non-condensing; Non-operating: 5 – 95% non-condensing
  

Power

Power Supply
  • Redundant 1400W high-efficiency power supply with PMBus
  • 80 PLUS Gold Certified
AC Input
  • 1100W: 100 – 140V, 50 – 60Hz, 9.5 – 13.5 Amp
  • 1400W: 180 – 240V, 50 – 60Hz, 7.0 – 9.5 Amp
DC Output +5V standby
  • 4 Amp
DC Output +12V
  • 92 Amp @ 100-140V
  • 116 Amp @ 180-240V
With distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp

Regulatory (Power Supply)

Power Supply Safety / EMC
  • USA – UL listed, FCC
  • Canada – CUL listed
  • CCC Certification
  • EN 60950 / IEC 60950-Compliant
  • Europe / CE Mark
  • Germany – TUV Certified
Rackform Rackmount Servers
Storform Storage
Hyperform HPC
Bladeform Blade Servers
Racks & Accessories
Spares Kits
What's New
1U Servers
2U Servers
3U & Larger Servers
High-Density Servers
Virtualization Products
Rackmount LCDs
Battery Backup Modules
Warranties
Technical Support
Support & Downloads
Discontinued Servers
Library
News & Press Releases
Events
Careers
Newsletters
Privacy Policy
About Us
Contact Us
My Account
Cart
Checkout

Copyright © 2010 Silicon Mechanics

Silicon Mechanics and the Silicon Mechanics logo are registered trademarks of Silicon Mechanics, Inc.
Intel, the Intel logo, Xeon, and Xeon Inside, are trademarks or registered trademarks of Intel Corporation in the US and other countries.
All other trademarks are the property of their respective owners.