i:2089 "SM-B470A Blade"


	Hello guest • log in • shopping cart

Site Search:

Quote Lookup:
Quote ID	Conf #

Home > Discontinued > Blade Servers

→ view image gallery

SM-B470A Blade
This extremely powerful server blade integrated into the Bladeform family of products allows consolidation of front-end, infrastructure, mid-tier, and back-end applications onto a single modular family of products. The SM-B470 Xeon MP Server Blade greatly extends the capability of the Bladeform Blade Server Platform to consolidate servers, dramatically reducing data center space and total cost of ownership.

Please see our Bladeform Blade Server System.

Microprocessor
Supports up to 4 microprocessors	Intel® Xeon™ MP 2.8 GHz or faster 2 MB ECC L2 cache
Memory
Eight double data rate (DDR) PC2100 sockets
Memory Capacity	Support for 512 MB to 8 GB
DIMM Sizes	256 MB, 512 MB, 1 GB, 2 GB
Memory Type	2-way interleaved DDR, PC2100, ECC SDRAM registered x4SDDC* (Single Device Data Correction) DIMMs only
Drives
Support for up to two internal IDE 2.5-inch hard disk drives; space for only one internal IDE disk if an I/O expansion option is installed (zero drives with two I/O expansion cards installed)
Size
Height	24.5 cm (9.7 inches)
Depth	44.6 cm (17.6 inches)
Width	5.8 cm (2.28 inches)
Maximum weight	7.0 kg (15.4 lbs.)
Integrated Functions
Four Gigabit Ethernet controllers support full duplex, Wake on LAN®, teaming and failover
ATI Rage XL PCI 2.2 video controller with 8 MB of video memory
Local service processor provides system and environmental monitoring, event recording, alert capability/RS-485 interface for communication with the Server Blade Chassis and the management module.
IDE ATA-100 hard disk drive controller
Light-Guided Diagnostics (LED lights indicate failing component) Flash-based embedded diagnostics
USB buses for communication with keyboard, mouse, diskette drive, and CD-ROM drive¹
Chipset: Server Works* Grand Champion LE
Front Panel Buttons
Keyboard/ mouse/ video	This button is for associating the keyboard port, mouse port, and video port with this blade server; the LED on this button flashes while the request is being processed, then is steady when ownership has been transferred to the blade server
Power Control Button	This button is located behind the control panel door; press this button to manually turn the blade server on or off
Front Panel LEDs
Blade-error LED	When this amber LED is lit, it indicates that a system error has occurred in the blade server
Information LED	When this amber LED is lit, it indicates that information about a system error for the blade server has been placed in the system Error log
Location LED	When this blue LED is lit, it has been turned on remotely by the system administrator to aid in visually locating the blade server; the location LED on the SBCE unit will be on as well
Activity LED	When this green LED is lit, it indicates that there is hard-disk-drive or network activity
Power-on LED	This green LED indicates the power status of the blade server in the following manner: • Flashing rapidly�the service processor on the blade server is handshaking with the SBCE management module • Flashing slowly�the blade server has AC power but is not turned on • Steady�the blade server has AC power and is turned on

Predictive Failure Analysis (PFA) alerts
Microprocessor	Cooling Fans
Input/Output
Power, cooling, removable-media drives, external ports, and advanced system management are provided by the Blade Server Chassis SBCE.
Environment
Air Temperature	Operating (system): 10�C to 35�C (50�F to 95�F); 0 to 914m (2998.69 ft) altitude Operating (system): 10�C to 32�C (50�F to 89.6�F); 914m to 2134m (2998.69 to 7000 ft.ft) altitude Non-operating (system): �40� to +60�C (-40� to +140�F)
Humidity	Operating: 8% to 80% Non-operating: 5% to 80%
Electrical Input
Input Voltage	12 V dc
Safety Compliance
USA	UL 60950 � 3rd Edition/CSA 22.2. No. 60950
Canada	cUL certified � 3rd Edition/CSA 22.2. No. 60950- for Canada (product bea the single cUL mark for U.S. and Canada)
Europe	Low Voltage Directive, 73/23/EEC TUV/GS to EN60950 2nd Edition with Amendments, A1 = A2 + A3 + A4
International	TUV/CB to IEC 60950 3rd Edition TUV/CB - EN60 950 2nd Edition + Amd 1-4 TUV/CB - EMKO-TSE (74-SEC) 207/94
Australian/New Zealand	CB Report to IEC 60950, 3rd Edition plus international deviation


Electromagnetic Compatibility (EMC)
USA	FCC CFR 47 Part 2 and 15, Verified Class A Limit
Canada	IC ICES-003 Class A Limit
Europe	EMC Directive, 89/336/EEC EN55022, Class A Limit, Radiated & Conducted Emissions EN55024 ITE Specific Immunity Standard EN61000-4-2 ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge) EN61000-4-3 Radiated Immunity (Level 2) EN61000-4-4 Electrical Fast Transient (Level 2) EN61000-4-5 AC Surge EN61000-4-6 Conducted RF EN61000-4-8 Power Frequency Magnetic Fields EN61000-4-11 Voltage Dips and Interrupts EN61000-3-2 Limit for Harmonic Current Emissions EN61000-3-3 Voltage Flicker
Japan	VCCI Class A ITE (CISPR 22, Class A Limit) IEC 1000-3-2 Limit for Harmonic Current Emissions
Australian/New Zealand	AS/NZS 3548, Class A Limit
Taiwan	BSMI Approval
Korea	RRL Approval

Rackform Rackmount Servers
Storform Storage
Hyperform HPC
Bladeform Blade Servers
Racks & Accessories
Spares Kits

What's New
1U Servers
2U Servers
3U & Larger Servers
High-Density Servers
Virtualization Products

Rackmount LCDs
Battery Backup Modules
Warranties
Technical Support
Support & Downloads
Discontinued Servers

Library
News & Press Releases
Events
Careers
Newsletters
Privacy Policy

About Us
Contact Us
My Account
Cart
Checkout

Silicon Mechanics and the Silicon Mechanics logo are registered trademarks of Silicon Mechanics, Inc.
Intel, the Intel logo, Xeon, and Xeon Inside, are trademarks or registered trademarks of Intel Corporation in the US and other countries.
All other trademarks are the property of their respective owners.