Blade Server


	Hello guest • log in • shopping cart

Site Search:

Quote Lookup:
Quote ID	Conf #

Home > Bladeform Blade Servers > Bladeform 9100 Series

→ view image gallery

Bladeform 9100 Platform
The Bladeform 9100 Series Blade Server Platform is designed for performance, density, power efficiency, and cost effectiveness. The 9100 Series features a large per-blade memory capacity, 90%+ efficient power supplies, outstanding storage flexibility, advanced management and monitoring, and fast networking options. These features, combined with the affordable nature of the Bladeform 9100 Series, deliver an easy-to-manage blade server platform with unparalleled density.

System Price:	$5110.00
Warranty	$421.00

Bladeform 9100 Enclosure	9110 Server Blade	Chassis Management Module
Gigabit Ethernet Switch	Ethernet Pass-Thru Module	1400W Power Supply

Key Features

Server Blade	Up to 14 hot-plug server blades
LED	Power LED, Fault LED
Gigabit Ethernet	Gigabit Ethernet switch or pass-through module
Management Module	Chassis Management Module (CMM) providing remote KVM and IPMI 2.0
Power Supply	Four hot-swap 1400W power supplies, 3+1 redundant
Cooling Design	8 cooling fans
Dimensions (HxWxD)	12.1" x 18.5" x 29"

Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports 2 Intel® Xeon® 5400 or 5300 Series processors up to 3.16 GHz Supports 2 Intel® Xeon® 5200 or 5100 Series processors up to 3.40 GHz
System Bus	1333 / 1066 MHz system bus

System Memory

Memory Capacity	Six 240-pin DIMM sockets Supports up to 48 GB 667 / 533MHz DDR2 ECC Registered memory Memory must be populated in pairs
Memory Type	667 / 533MHz ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage	1.8V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset	Intel® 5100 (San Clemente) Intel® ICH9R
SAS	LSI SAS 1068E RAID 0, 1 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 via Chassis Management Module (CMM) Optional per-blade IPMI v.2.0 via add-on card
Network Controllers	Intel® (ESB2) 82575EB Dual-Port Gigabit Ethernet Controller Intel® I/OAT support
Graphics	ATI ES1000 controller with 32 MB of video memory
Super I/O	Winbond 83627DHG chip
Clock Generator	CK505 chip

System BIOS

BIOS Type	16Mb SPI EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0 USB Keyboard support Hardware BIOS Virus protection

Front Panel

Buttons	Power On/Off button KVM button
LEDs	Power LED UID / KVM LED Network Activity LED Fault LED
Connector	SUV (Serial/USB/Video) & KVM Connector

Dimensions

Height	11.32" (288 mm)
Width	1.19" (30.2 mm)
Depth	18.9" (480 mm)
Maximum weight	8.6 lbs (3.9 kg)

Drive Bays

Three 2.5" hot-swap drive bays

Input / Output

KVM	1 Front Connector for Supermicro KVM Card
SIMBL	1 SIMBL Slot

Operating Environment / Compliance

Environmental Spec	Operating Temperature: 10° to 35° C (50° to 95° F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Electromagnetic Compatibility (EMC)

United States / Canada	FCC-Emissions (US) Verification
Europe	EN55022 – Emissions EN55024 – Immunity EN61000-3-2 – Harmonics EN61000-3-3 – Voltage Flicker CE – EMC Directive 89/336/EEC

Safety Compliance

United States / Canada	UL60950-1 – CSA/CUL 60950–1
Europe	EN60950-1, CE – Low Voltage Directive 73/23/EEE
Germany	TUV

Chassis Management Module

Remotely manage and monitor server blades, power supplies, cooling fans, and networking switches
IPMI 2.0 compliant, with KVM over LAN / KVM over IP
Serial over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Management Tools – IPMIView, CLI (Command Line Interface)
Supports RMCP & RMCP + Protocols

Specifications

VGA Port, 2x USB Ports
Remote Management Processor and sub-system
1x LAN port
Video ADC, Video Compress FPGA
I²C, IPMI Management
12V Hot-swap Controller
GBX Backplane Connector

Gigabit Ethernet Switch

Chipset	Broadcom BCM5345M
Internal Ports	Ten 1-Gbps downlink ports for LAN interfaces of the server blades (capable of 14 internal ports)
External Uplink Ports	Ten 1-Gbps uplink RJ-45 ports
Type	Layer-2 switch
Bandwidth	24 Gbps
Trunking	Link aggregation support
Jumbo Frame Support	Up to 9k bytes
Remote Management	Browser-based management
Protocols	Spanning Tree, Rapid Spanning Tree, and Multiple Spanning Tree protocols (802.1D/1s/1w)
OS	Firmware Upgradeable

1Gbit Ethernet Pass-Thru Module

Chipset	Broadcom 5464
Internal Ports	Ten 1-Gbps downlink ports for LAN interfaces of server blades (capable of 14 internal ports)
External Uplink Ports	Fourteen 1-Gbps uplink RJ-45 ports
Remote Management	Browser-based management
Protocols	n/a
Note	Pass-Thru Module is 1 Gbit only; it does not service 10 or 100 Mbit connections.

1400W Power Supply

Output	1400W
Type	Redundant Module (3+1)
+12V	116A (200~240VAC input) 100A (100~140VAC input)
5VSB	16A
PFC	Yes
Peak Efficiency	90%+
Input AC Range	100~240VAC
Operating Conditions	Temp: -5 to 50°C Humidity: 5 to 95% RH
Fan Type	2 x 90mm fans PFC0912DE-6L38 (8000 RPM with PWM)

Rackform Rackmount Servers
Bladeform Blade Servers
Storform Storage
Hyperform HPC
What's New
Special Offers

1U Servers
2U Servers
3U & Larger Servers
1U Twin Servers
Virtualization Products
Clearance Items

Rackform Expedited Prebuilt
Racks & Accessories
Rackmount LCDs
Sliding Rail Kits
Spares Kits
Warranties

Support & Downloads
Library
News & Press Releases
Careers
Sponsorships & Affiliations
Discontinued Servers

About Us
Contact Us
Events
My Account
Cart
Checkout

Silicon Mechanics and the Silicon Mechanics logo are registered trademarks of Silicon Mechanics, Inc.
Intel, the Intel logo, Xeon, and Xeon Inside, are trademarks or registered trademarks of Intel Corporation in the US and other countries.
All other trademarks are the property of their respective owners.